Skip to main content Skip to search Skip to navigation

Workshop guide · KBS

How to trim KBS shafts

KBS publishes a separate chart for every parallel tip shaft. The values depend on the model and are partly well above those of other brands.

KBS Tour (standard)

Shaft 2-iron 3-iron 4-iron 5-iron 6-iron 7-iron 8-iron 9-iron Wedge
Tip trim 2 7/16" 3" 3 9/16" 4 1/8" 4 11/16" 5 1/4" 5 13/16" 6 3/8" 6 3/8"

KBS C-Taper (standard)

Shaft 2-iron 3-iron 4-iron 5-iron 6-iron 7-iron 8-iron 9-iron Wedge
Tip trim 3 3/4" 4 5/16" 4 7/8" 5 7/16" 6" 6 9/16" 7 1/8" 7 11/16" 7 11/16"

KBS C-Taper Lite (standard)

Shaft 2-iron 3-iron 4-iron 5-iron 6-iron 7-iron 8-iron 9-iron Wedge
Tip trim 2" 2 1/2" 3" 3 1/2" 4" 4 1/2" 5" 5 1/2" 5 1/2"

KBS TGI, PGI and MAX Graphite (standard)

Shaft 3-iron 4-iron 5-iron 6-iron 7-iron 8-iron 9-iron Wedge
Tip trim 1/2" 1" 1 1/2" 2" 2 1/2" 3" 3 1/2" 3 1/2"

KBS hybrid shafts (Tour Prototype, PGH, MAX HL)

Hybrid 2 3 4 5 6
Tip trim from longest hybrid 0" 1/2" 1" 1 1/2" 2"

All values in inches (1 inch = 25.4 mm), tip trim at the tip end. Then cut at the butt end to playing length.

Good to know

  • Softer or stiffer: for Tour, C-Taper and C-Taper Lite, 1 inch more or less tip trim changes the stiffness by half a frequency step.
  • Woods (TD, PGW, MAX HL): the driver stays untrimmed. For 3-wood and 5-wood KBS uses the next weight class in the same flex and trims 1 or 1 1/2 inches at the tip.
  • TGBLACK: no tip trim.
  • Shafts with an iron number in the name (for example C-Taper Lite 7) are taper tip shafts for exactly that iron. Cut them at the butt end only.

Source: KBS Parallel Tip Trimming Instructions 2026 (kbsgolfshafts.com), as of November 2026. Manufacturer figures are recommendations, fine-tuning belongs in a fitting.

To the trim sheet with all trim codes →

FAQ: trimming KBS shafts

How much do I tip trim a KBS Tour for the 7-iron?

According to KBS, 5 1/4 inches at the tip as standard, then cut at the butt end to playing length.

Can I trim a KBS shaft softer or stiffer?

Yes. According to KBS, 1 inch more or less tip trim changes the stiffness by half a frequency step. A fitting helps here.

Do I tip trim KBS taper shafts?

No. Taper tip shafts are made for one iron number and are cut at the butt end only.

Rather have it trimmed?

We cut, install and check your shaft in our workshop in Erfurt, Germany.

To the shaft service